818-700-9712

OFF-ROAD  RACING
Superior Performance that out performs the competition

Sway-A-Way has been involved in off-road since the late 60’s. Sway-A-Way has always focused on building the best quality products that out perform the competition. Sway-A-Way products have been installed on winning off road cars for more than 35 years. Products include axles, torsion bars, leaf springs, adjusters, shocks and sway bars for a wide variety of applications including buggies, sand cars, trucks and crawlers. Sway-A-Way products handle the terrain. There is no substitute!

2.5" RaceRunner Remote Reservoir Shocks - 2008 Prices
Our 2.5” RaceRunner shocks have 51% more piston area and oil capacity than our 2.0” line, providing greater dampening rates for heavier vehicles and more severe applications. These shocks are ideal for off-road buggies, long travel sand cars, prerunners, and performance street vehicles. RaceRunner 2.5” shocks have all the high performance racing attributes as our 2.0” line with added capacity for greater performance. All 2.5” shocks come standard with Nickel plated cylinders, high strength 7/8” Nitro Steel shafts that will not chip or rust & are fully rebuildable and revalvable. Shock bodies are threaded for both single & dual rate applications, and use standard 3.0” I.D. coil springs. RaceRunner 2.5” shocks come equipped with high strength Com10 Teflon lined steel spherical bearings for high performance racing applications.

2.5" RaceRunner 3 Tube Bypass Shocks - 2008 Prices
Racerunner’s 2.5” Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks. These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8” Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders. RaceRunner 2.5” Bypass Shocks come standard with 2 compression tubes & 1 rebound tube for position sensitive tuning and are ideal for off-road buggies, long travel sand cars, prerunners, and performance street vehicles. Additional bypass tubes can be added for an extra charge.

2.5" RaceRunner Piggyback Shocks - 2008 Prices
Racerunner’s 2.5” Piggyback Shocks utilize an innovative design which allows the reservoir to swivel 360* around the shock body for easy and secure mounting. These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8” Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders. This adjustable system provides double the flow rate over remote flex lines and can be used with or without coil springs on sand buggies, prerunners, performance street vehicles & off road racing applications. Shock bodies are threaded for both single & dual rate applications, and use standard 3.0” I.D. coil springs.

2.5" RaceRunner 3 Tube Piggyback Bypass Shocks - 2008 Prices
Racerunner’s 2.5” PiggyBack Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks. These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8” Nitrosteel shafts that will not chip or rust, and extremely durable Nickel plated cylinders. RaceRunner 2.5” Bypass Shocks come standard with 2 compression tubes & 1 rebound tube for position sensitive tuning and are ideal for off-road buggies, long travel sand cars, prerunners, and performance street vehicles. Additional bypass tubes can be added for an extra charge.

2.5" RaceRunner Emulsion Shocks - 2008 Prices
RaceRunner makes a complete series of 2.5” Emulsion Shocks (without remote reservoirs), which are ideal for extreme rock crawlers, off-road buggies, sand cars and as coil carriers to be accompanied by either a 2.5” or 3.0” bypass shock. These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8” Nitrosteel shafts that will not chip or rust, and Nickel plated cylinders. Shock bodies are threaded for both single & dual rate applications, and use standard 3.0” I.D. coil springs.

2.5" RaceRunner Smooth Body Bottom Mounted Piggyback Shocks - 2008 Prices
Racerunner’s 2.5” Bottom Mount Piggyback Shocks utilize an innovative design which allows the shock body to swivel 360* for ease of installation. These shocks feature Com-10 Teflon lined steel spherical bearings, 7/8” Nitrosteel shafts that will not chip or rust, and smooth Nickel plated cylinders. This system is ideal for prerunners, performance street vehicles & off road racing applications.

3.0" RaceRunner Remote Reservoir Shocks - 2008 Prices
RaceRunner 3.0” shocks are designed for extreme applications such as Class 1, Class 7, Class 8 and Trophy Trucks. All 3.0” Shocks feature tough 1” Nitrosteel shafts that will not chip or rust, Nickel plated cylinders, Com12 Teflon lined steel spherical bearings and high strength billet end construction. The shock bodies are threaded for both single and dual rate applications and use standard 3 5/8” I.D. coil springs. RaceRunner 3.0” shocks are available with shock travel of 8” to 18” in 2” increments.

RaceRunner 3.0” shocks have 49% more piston area and oil capacity than our 2.5” shocks (125% more than our 2.0” shocks). RaceRunner 3.0” shocks are used by Craig Turner 2004 SCORE class 7 Champion & Barry Karakas 2004 SCORE Class 7 runner up & reigning MDR Class 7 Champion 3 years in a row, and Ted Moncure 2004 SCORE Class 7s, now it’s your turn.

3.0" RaceRunner 3 Tube Bypass Remote Reservoir Shocks - 2008 Prices
Racerunner 3.0” Remote Reservoir Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks. These shocks feature tough 1” Nitrosteel shafts that will not chip or rust, Nickel plated cylinders, Com12 Teflon lined steel spherical bearings and high strength billet end construction. RaceRunner 3.0” Bypass Shocks come standard with 2 compression tubes & 1 rebound tube for position sensitive tuning and are ideal for Class 7, Class 8, Trophy Trucks & off-road buggies. Additional bypass tubes can be added for an extra charge.

3.0" RaceRunner 3 Tube Piggyback Bypass Back Shocks - 2008 Prices
Racerunner 3.0” PiggyBack Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks. These shocks feature tough 1” Nitrosteel shafts that will not chip or rust, Nickel plated cylinders, Com12 Teflon lined steel spherical bearings and high strength billet end construction. RaceRunner 3.0” Bypass Shocks come standard with 2 compression tubes & 1 rebound tube for position sensitive tuning and are ideal for Class1, Class 7, Class 8, Trophy Trucks & off-road buggies. Additional bypass tubes can be added for an extra charge.

4.0" RaceRunner 6 Tube Piggyback Bypass Shocks - 2008 Prices
Brand new for 2007, Racerunner 4.0” PiggyBack Bypass Shocks utilize an innovative design which allows the shock body to rotate 360* for ease of installation & eliminates the need for left and right specific shocks. These shocks feature Com-14 Teflon lined steel spherical bearings, industries first 1 1/8” Nitrosteel shaft that will not chip or rust, and Nickel plated cylinders. RaceRunner 4.0” Bypass Shocks are custom built to order which allows for specific placement of 4 compression tubes & 2 rebound tubes for position sensitive tuning and are ideal for Class 8, Trophy Trucks & off-road buggies. Additional bypass tubes can be added for an extra charge.